Maintenance of mold accessories

Mar 19, 2025

Leave a message

The maintenance of mold accessories is essential to ensure the normal operation of the mold and extend its service life. The following are specific methods and steps for the maintenance of mold accessories:

Regular cleaning: After each use of the mold, the residual materials and oil stains on the mold should be cleaned in time. Use special cleaning agents and tools to clean and ensure that the mold surface is clean and free of impurities. For stubborn stains that are difficult to remove, ultrasonic cleaning equipment can be used for cleaning.

Check and replace wear parts: Regularly check whether the various parts of the mold are intact. If wear or damage is found, it should be replaced in time. In particular, the guide mechanism, slider, ejector and other easily worn parts need to be checked and replaced regularly.

Lubrication maintenance: Regularly lubricate the sliding parts of the mold to reduce friction and wear. Choose suitable lubricating oil or grease to ensure good lubrication effect and do not affect product quality. Generally speaking, a comprehensive lubrication maintenance is required for every 500-1000 productions.

Anti-rust treatment: The mold needs to be anti-rust treated during storage to prevent rust. Anti-rust oil or anti-rust grease can be applied to the mold surface, especially in a humid environment, more attention should be paid to anti-rust treatment.

‌Control mold temperature‌: For some molds, such as blow molds, the mold temperature needs to be reasonably controlled. Too high or too low mold temperature will affect product quality. Check the cooling system regularly to ensure that the waterway is unobstructed.

‌Fasteners inspection‌: Regularly check whether the fastening screws and nuts of the mold are loose, and use tools such as torque wrenches to tighten them to ensure that the various parts of the mold are firmly connected.

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!