-
Whorl MoldThe threaded opening is a key part for matching with the bottle cap to achieve sealing. Through precisely designed and processed threaded openings, they can be closely matched with the bottle cap,...read more
-
Mold Seal RingSealing leak-proof is the main function of the mold seal ring. It ensures the sealing and integrity of the system and maintains the normal operation of the system by forming a tight seal between...read more
-
Mold Water NozzleWater nozzle is mainly used for efficient and fast connection of cooling water and oil of mold. It can be divided into traditional water nozzle and quick water nozzle according to the usage...read more
-
Mold ScrewsMold screws are important parts used to fix and connect various parts of the mold, and have a critical impact on the stability, accuracy and service life of the mold.read more
-
Type CavityMold type cavity is the main part of the mold cavity of the bottle mold, usually a hollow cylindrical structure. Its size and shape directly determine the outer contour of the bottle, including...read more
-
Mold Valve NeedleIn the hot runner system, under the action of the valve needle control device, the valve needle opens or closes the gate at a predetermined moment through mechanical movement, thereby controlling...read more
-
Mold Heating CoilThis is a Mold heating coil. Heating principle: When the resistor wire in the mold heating coil passes through the current, due to the existence of the resistor, the electrical energy is converted...read more
O-Rings are typically called out by the inner diameter of the torus and the diameter of the round cross-section. Thus, for an AS568-010 size 70 shore A, Nitrile would be: 0.239 x 0.070 70 BN O-Ring...
Continuously molded o-rings are an excellent sealing option for large, non-standard size dynamic applications. Our continuous molding process does not require tooling and can handle virtually...
The Continuously Molded O-Rings manufactured for The O-Ring Store LLC are recommended for use in any large diameter O-Ring groove where vulcanized or serpentine o-rings would present...
Aug 24, 2018 · To prevent this from happening, O-rings are often applied to seal the joints. Mold structure design should take the following principle into consideration in case O-rings are applied:...
Step 1: Customizing. First you have to use the Customizer page to set the molds to your parameters. Parameter "Inner Diameter" defines the inner diameter of the ring. Parameter "Thickness" defines...
O-RINGS & X-RINGS. Both O-rings and X-rings are often referred to by the collective term “seals.”. CTG’s experienced engineers will custom tailor a seal to fit your exact requirements, and...
